Vendor
Product Information
Note
- All equipment was energized and rotated in September 2019 prior to disassembly in to 20 & 40 ft storage containers - Mineral processing equipment was transported to Verner, ON Quarry and stored in 3 – 40 ft containers and one 20 ft container. - Refining, Centrifugal Gravity, 2 -6x16 tables were shipped to the SCR Main Office in Val Caron, ON and was reassembled to operate on a 480 V 100 KW operation. - Refining equipment includes MIFCO B-160 furnace, IonnetX electrowinnning cell, pumping systems, 1000 L Totes & tanks to operate a concentrated leaching circuit - Buyer is responsible for loading and shipping of equipment - Please Contact Mine Source for Price and More Details
Additional Information
Unused 37 kW 4×8 Ball Mill with Separate MCC
– Built by WinnerMac in 2017
– Gears professionally installed and laser aligned
– Steel liners installed, grate discharge mill
– Magnetic Separator installed on discharge end of mill with intent of removing Magnetite
– Field disconnects installed in mill, Benshaw speed controller positioned in 20 ft MCC container
– Mill Containers spray foam insulated
18 Cubic Ft Denver Style Flotation Cells
– All equipment was electrified by SCR employees but vessels were not water tested
– 4 of the cells were relocated to a 20 ft container with one of the Centrifugal concentrators
– 4 of the cells placed in a 40 ft container with other unused surplus mineral processing equipment
Gravity & Flotation Equipment stored in 2-20 ft containers
– 4” S.S. pneumatic feed sampler positioned at entry of circuit
– Winner Mac STL 30 (6” manual centrifugal concentrator)
– 4-18 cubic ft flotation cells feed from Gravity
– 6×16 shaker table stored in adjacent 20 ft container
– 100 amp main disconnect & local disconnect
– Electrically field tested & currently connected to a mobile 480 V generator
Dedicated Winnermac STL30 Concentrator
– Unit positioned on a 4×8 two compartment pump box
– First compartment for concentrator feed
– Second compartment set up to hole 1 T super sacks for holding gravity concentrates
– Equipment was electrically & water tested
– Currently electrically connected to a portable generator for test purposes only
– 208V/480 V 3.7kW siemens china motor
Refining Equipment
– PMPPC IonnetX Electrowinning Cell
– Operates on 480 V 25 kW rectifier supplied by
– Aldonex Air cooled Power Supply 1000 ADC 0-12 VDC output
– Aldonex Power Supply Serial # 2035861
– Units were electrically bump tested, but not water tested
– Additional 1000 gallon tanks or 1000 L totes available for preganant & barren tanks
– Suitable for use with 1T carbon stripping vessels
– MIFCO (McEnglevan Industrial Furnace Co.) 2016 model
– B-160 Model – capable of utilizing #16 crucible for melting up to 30 lbs copper, ~300 troy ounces
– Operates on 480 V power, but can be modified for 208v or 120v single phase
– Requires 300 lb Propane supply for 425,000 BTU
– Field ready, never used
– All refining equipment contained in 20ft container
600 V-208 Step down 200 kW Transformer
Other Equipment
– 2 – 5×16 double deck shaker tables positioned in a extended 40 ft insulated container that was bump tested prior to removal
– 3-1000 gallon agitated tanks stored in same 40 ft container
– 3×10 rotary 4 mm trommel
– 2 ftx20 ft rotary dryer
– Dust Collection Cyclone
– 6”x8 ft Rotary Screw Classifier
– 2- 4” Chinese Hydro cyclones
– Additional Spare Siemens China 480 V motors
– 480 V 100 kW Scania Generator Available
– 600 V 100 kW Cummins Generator Available
– 18”x30” single deck Rotex Screener -1 mm screen